Optimum OPTIturn TX 6222 Manual Metalworking Lathe (3 Phase 400V)
£41,724.90 inc VAT £34,770.75 ex VAT
Features
-
- Machine bed made of heavily ribbed cast iron
- One-piece machine base made of steel
- High stiffness of the headstock housing due to heavily ribbed 25GG casting
- All gears of the feed gear made of steel, hardened and ground
- Waves on needle bearings, all components are lubricated in an oil bath
- Hardened and ground spindle ensures tremendous accuracy and durability
- Due to the high cutting performance, a high chip removal during roughing is no problem
- Service-friendly removable rear panel
- Energy chain for gentle line and hose routing
- Lockable chip protection moves with the bed slide with integrated position indicator and coolant hose, manually displaceable
- Decoupled handwheels tested to EN 23125
- Two-channel right-left switch tested to EN 23125
- No change wheels needed
- Switch with life cycle calculation tested according to EN ISO 13849
- With safety device against simultaneous operation of threading and feed mechanism
- Bed guides hardened and precision ground
- Electronically braked engine
- Electronic feed shutdown of the Z-axis
- All electronic controls to reach centrally
- Complete illumination of the workspace
- External coolant tank with level indicator and oil separator
- Complete guide and tension spindle cover
- Electrical position switch off with quadruple position stop
- 3-jaw lathe chuck in the standard scope of delivery
- Quick change steel holder SWH 7-C
- 1 steel holder 32 x 130 type D for square chisel 25 mm
- Digital Position Display DP700
TX 5216
- Large spindle bore Ø 80 mm
TX 6222 Included:
- Larger spindle bore Ø 105 mm
- Three jaw chucks
- Reduction sleeve MK 7 / MK 5
- Fixed center point MK 5 long
- Fixed centering point MK 5 short
- Quick change steel holder SWH 5-B (TX 5216)
- Quick change steel holder SWH 7-C (TX 6222)
- Steel holder 25 x 120 type D for square chisels
- operating tool
Description
0343-2460
Precision master and spindle lathes meet the highest requirements in terms of technical equipment and precision. With digital position indicator NEWALL DP 700
|
TECHNICAL DATA
|
|||
|
Dimensions and weights
|
|||
| Length (product) approx. | 3600mm | Height (product) approx. | 1860mm |
| Width/depth (product) approx. | 1194mm | Net weight approx. | 2800kg |
| Work areas | |||
| Max. height | 310mm | Swing diameter above longitudinal slide | 580mm |
| Max. width | 2225mm | Swing diameter above planing slide | 425mm |
| Swing diameter above machine bed | 620mm | Turning length in bed bridge | 880mm |
| Swing diameter in bed bridge | 880mm | Bed width | 350mm |
| Speed range | |||
| Number of gears | 12 | Speed range |
30 – 1500min¯¹
|
| Electric Data | |||
| Drive motor output | 7.5kW | Mains frequency | 50Hz |
| Supply voltage | 400V | ||
|
Cooling lubricant system
|
|||
| Cooling lubricant system coolant pump output | 60W | ||
| Spindle | |||
| Spindle chuck | Camlock DIN ISO 702-2 No. 8 | Spindle cone | MT 7 |
| Spindle bore/rod passage diameter | 80mm | ||
| Tailstock | |||
| Tailstock chuck | MT5 | Tailstock quill diameter | 72mm |
| Tailstock quill stroke | 180mm | ||
| Pitches | |||
| Metric pitch | 0.5 – 15mm/rev | Diametrical pitch | 4 – 120D.P. |
| Imperial pitch | 60 2Threads/1″ | Modular thread pitch |
0.5 – 15mm/rev
|
| Travel | |||
| Travel X axis | 170mm | Travel Z axis | 350mm |
| Feed | |||
| Longitudinal feed range | 0.1 – 3mm/rev | Flat feed range |
0.05 1.5mm/rev
|
|
Electrical connections
|
|||
|
Total rated value
|
Additional information
| Weight | 2800 kg |
|---|---|
| Brand | OPTIturn |
Related products
-
Optimum 32 x 130 type H Spare steel holder
£150.96 inc VAT £125.80 ex VAT Add to cart -
Optimum 25 x 120 type D Spare Steel Holder
£125.44 inc VAT £104.53 ex VAT Add to cart -
Optimum Chuck Face Plate Ø 300 mm Camlock DIN ISO 702-2 No. 4
£142.08 inc VAT £118.40 ex VAT Add to cart -
Optimum Chuck Face Plate Ø 330 mm Camlock DIN ISO 702-2 No. 5
£164.28 inc VAT £136.90 ex VAT Add to cart
Reviews
There are no reviews yet.