Optimum OPTIturn TM 3310V Manual Centre lathe with DRO | 1 metre between centres | (3Ph 400V)

£12,866.04 inc VAT £10,721.70 ex VAT



  •  Hardened and ground Z-axis guideway
  •  Guaranteed concentricity of the spindle nose better than 0.015 mm
  •  DC 24 volt electrical system
  •  Smooth running feed gear with rounded gears running in oil bath
  •  Handwheels with adjustable fine scaling 0.04 / 0.02 mm
  •  Safety handwheels with disengaging function according to EN23125 in X- and Z-axis
  •  Right/left rotation switchable on bed slide
  •  Two-channel right/left switch, tested according to EN 23125
  •  Switch rod on the bed slide for selection of longitudinal or cross feed
  •  Switch with life cycle calculation tested according to EN ISO 13849
  •  Hardened main spindle mounted in adjustable, precise taper roller bearings
  •  Machine base in stable steel construction
  •  Motor protection switch
  •  Main motor electrically braked
  •  Quadruple steel holder
  •  Emergency stop impact switch right and left
  •  Three-jaw lathe chuck in standard scope of delivery


  • Digital position indicator DPA 32
  • Inverter drive with integrated EMC filter
  •  Low-noise motor operation due to high pulse frequency
  • Fast current limiting (FCL) for trouble-free operation with sudden
  • operation during sudden load surges
  •  Three-jaw lathe chuck Ø 160 mm, No. 4
  •  Reducing sleeve MK 5 / MK 3
  •  Non-running center point MK 3
  •  Quadruple steel holder 16 mm
  •  Change gear set
  •  Machine base
  •  Machine initial filling with quality oil
  •  Operating tool

        1 year warranty logo


EAN: N/A SKU: 0340-3027 Category: Tags: ,


Technical Data

Dimensions and weights
Length (product) approx. 1760mm
Width/depth (product) approx. 745mm
Height (product) approx. 1320mm
Net weight approx. 469kg
Max. height (product) ca. 1590 (DPA)mm
Work areas
Max. height 165mm
Max. width 1000mm
Swing diameter above machine bed 330mm
Swing diameter above planing slide 216mm
Bed width 190mm
Speed range
Number of gears 6Steps
Speed range 14 – 2800min¯¹
Electrical Data
Drive motor output 1.5kW
Supply voltage 400V
Mains frequency 50Hz
Spindle chuck Camlock DIN ISO 702-2 No. 4
Spindle bore/rod passage diameter 38mm
Spindle cone MT 5
Tool holder max. chuck height 16mm
Tailstock chuck MT 5
Tailstock quill stroke 100mm
Tailstock quill diameter 38mm
Metric pitch 0.4 – 10mm/rev
Number of metric pitches 29
Imperial pitch 56 – 4Gg/1″
Travel upper slide 90mm
Travel cross slide 168mm
Travel carriage saddle 850mm
Longitudinal feed range 0.02 – 0.4mm/rev
Number of longitudinal feeds 24
Flat feed range 0.01 – 0.2mm/rev
Number of flat feeds 32

Additional information




There are no reviews yet.

Be the first to review “Optimum OPTIturn TM 3310V Manual Centre lathe with DRO | 1 metre between centres | (3Ph 400V)”

Your email address will not be published. Required fields are marked *