Optimum OPTIturn TM 3310 Centre and spindle lathe Manual Lathe (3 Ph 400v)

£9,604.04 inc VAT £8,003.37 ex VAT


  • Hardened and ground Z-axis guideway
  •  Guaranteed concentricity of the spindle nose better than 0.015 mm
  •  DC 24 Volt – electrics
  •  Smooth running feed gear with rounded gear wheels running in an oil bath
  •  Handwheels with adjustable fine scaling 0.04 / 0.02 mm
  •  Safety handwheels with disengaging function according to EN23125 in the X and Z axis
  •  Right/left rotation switchable on the carriage
  •  Two-channel right/left switch, tested according to EN 23125
  •  Switch rod on carriage for selection of longitudinal or cross feed
  •  Switch tested with life cycle calculationft according to EN ISO 13849
  •  Hardened main spindle mounted in adjustable, precise taper roller bearings
  •  Machine base in stable steel construction
  •  Motor protection switch
  •  Main motor electrically braked
  •  Quadruple steel holder
  •  Emergency stop pushbutton right and left
  •  Three-jaw lathe chuck in standard scope of delivery

Delivery Contents

  •  three-jaw lathe chuck Ø 160 mm, No. 4
  •  LED machine light
  •  Reducing sleeve MK 5 / MK 3
  •  Non-rotating centring tip MK 3
  •  Quadruple steel holder 16 mm
  •  Change gear set
  •  Machine base
  •  Machine first filling with quality oil
  •  Operating tool

        1 year warranty logo

EAN: N/A SKU: 0340-3020 Category: Tags: ,


Optimum OPTIturn TM 3310 Centre and spindle lathe Manual Lathe

The centre lathes and bar lathes convince by their stable construction and easy handling. TM 3310D with digital position display DPA 31

Technical Data

Dimensions and weights
Length (product) approx. 1814mm Height (product) approx. 1263mm
Width/depth (product) approx. 740mm Net weight approx. 469kg
Work areas
Max. height 165mm Swing diameter above planing slide 216mm
Max. width 1000mm Bed width 190mm
Swing diameter above machine bed 330mm
Speed range
Number of gears 9stages Speed range
65 – 2000min¯¹
Electrical Data
Drive motor output 1.5kW Mains frequency 50Hz
Supply voltage 400V
Spindle chuck Camlock DIN ISO 702-2 No. 4 Spindle cone MT 5
Spindle bore/rod passage diameter 38mm Tool holder max. chuck height 16mm
Tailstock chuck MT 3 Tailstock quill diameter 38mm
Tailstock quill stroke 100mm
Metric pitch 0.4 10mm/rev Imperial pitch
56 – 4Threads/1″
Number of metric pitches 29
Travel X axis 90mm Travel Z axis 168mm
Longitudinal feed range 0.02 0.4mm/rev Flat feed range
0.01 0.2mm/rev
Number of longitudinal feeds 24 Number of flat feeds 32

Additional information




There are no reviews yet.

Be the first to review “Optimum OPTIturn TM 3310 Centre and spindle lathe Manual Lathe (3 Ph 400v)”

Your email address will not be published. Required fields are marked *