Optimum OPTIturn TH 5615D Heavy Duty Precision Centre and Spindle Manual Metalworking Lathe (3 Phase 400V)
£26,416.90 inc VAT £22,014.08 ex VAT
Free Delivery to Mainland UK!
Features:
- 1420mm distance between centres
- 560mm swing over bed
- 790mm swing over gap
- Hardened and ground Z-axis guideway
- Spindle mount Camlock DIN ISO 702-2 No. 8
- Handwheels with adjustable fine scale 0.04 / 0.02 mm
- Waves and wheels running in oil bath
- Adjustment range upper slide ± 90 °
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Main spindle running in oil bath
- Gear wheels smooth, hardened and ground with 2 adjustable precision tapered roller bearings
- Clear selection lever for switching the feed rates
- Closed design of the rapid-action feed gear
- Gears and shafts hardened and ground in an oil bath in precision bearings
- Right / left rotation on bed carriage via switching spindle switchable
- Central lubrication in the bed slide
- Tailstock for taper turning ± 10 mm adjustable
- Tailstock quill and hand wheel with adjustable fine scale 0.025 mm
Description
0346-2160
Optimum OPTIturn TH 5615D Heavy Duty Precision Centre and Spindle Manual Lathe
- All guides can be adjusted by wedge strips
- Handwheels decoupled and tested according to EN 23125
- Two-channel right-left switch tested to EN 23125
- Switch with life cycle calculation, tested according to EN ISO 13849
- Leading spindle
- Emergency stop blow switch, motor protection switch, lockable main switch
- Emergency stop device with foot control
- Safety handwheels with release function in the X and Z axis
- Tailstock for taper turning ± 10 mm adjustable
- Tailstock quill and hand wheel with adjustable fine scale 0.025 mm
- Fast, easy and tool-free adjustment by means of a clamping lever
- Strongly ribbed prism bed, induction hardened and precision ground from gray cast iron
- Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN
- LED machine lamp in chip protection
- Electrics with Siemens components
- Energy chain for gentle line and hose routing
- Adjustable scale of the threaded clock
Technical Data
| Dimensions and weights | |
|---|---|
| Length (product) approx. | 2950mm |
| Width/depth (product) approx. | 1150mm |
| Height (product) approx. | 1650mm |
| Net weight approx. | 2300kg |
| Work areas | |
|---|---|
| Max. height | 280mm |
| Max. width | 1420mm |
| Swing diameter above machine bed | 560mm |
| Swing diameter in bed bridge | 790mm |
| Swing diameter above planing slide | 355mm |
| Turning length in bed bridge | 170mm |
| Bed width | 350mm |
| Speed range | |
|---|---|
| Number of gears | 12 |
| Speed range | 25 – 1600min¯¹ |
| Electrical Data | |
|---|---|
| Drive motor output | 7.5kW |
| Supply voltage | 400V |
| Mains frequency | 50Hz |
| Cooling lubricant system | |
|---|---|
| Cooling lubricant system coolant pump output | 125W |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 8 |
| Spindle bore/rod passage diameter | 80mm |
| Tool holder max. chuck height | 25mm |
| Spindle cone | MT 7 |
| Tailstock | |
|---|---|
| Tailstock chuck | MK 5 |
| Tailstock quill stroke | 180mm |
| Tailstock quill diameter | 75mm |
| Pitches | |
|---|---|
| Metric pitch | 0.2 – 14mm/rev |
| Number of metric pitches | 47 |
| Imperial pitch | 112 – 2Gg/1″ |
| Number of imperial pitches | 60 |
| Diametrical pitch | 4 – 112DPI |
| Number of diametrical pitches | 50 |
| Modular thread pitch | 0.1 – 7mm/rev |
| Number of modular thread pitches | 34 |
| Travel | |
|---|---|
| Travel upper slide | 130mm |
| Travel cross slide | 316mm |
| Travel carriage saddle | 1210mm |
| Feed | |
|---|---|
| Longitudinal feed range | 0.059 – 1.646mm/rev |
| Number of longitudinal feeds | 35 |
| Flat feed range | 0.020 – 0.573mm/rev |
| Number of flat feeds | 35 |
| Electrical connections | |
|---|---|
| Total rated value | 8.5kW |
Additional information
| Weight | 2300 kg |
|---|---|
| Brand | OPTIturn |
Related products
-
Insert T31005A for 10mm / 12mm / 16mm PWGNR Turning Tools (Pack of 10)
£16.66 inc VAT £13.88 ex VAT Add to cart -
Optimum HSP 52 Spindle-Ø 48 – 56 mm Hollow spindle stop
£138.74 inc VAT £115.62 ex VAT Add to cart -
Optimum ML 2010 mm Measuring Bar | High Precision Linear Scale | Glass Scale for Optimum Lathes
£1,467.42 inc VAT £1,222.85 ex VAT Add to cart -
Optimum OPTIturn TH 4010D Manual Metalworking Lathe (3 Phase 400V)
£14,952.80 inc VAT £12,460.67 ex VAT Add to cart
Reviews
There are no reviews yet.