Metallkraft HMBS 340 CNC-DG-X Fully automatic two-column horizontal metal bandsaw

£65,478.90 inc VAT £54,565.75 ex VAT

EAN: N/A SKU: 0369-1341 Category: Tags: ,

Description

0369-1341

Metallkraft HMBS 340 CNC-DG-X Fully automatic two-column horizontal metal band saw with ARP system for miter cuts from +60 ° to -45 ° and material feed with 1000 mm length

 Technical Data
 Length (product) approx.  3030mm
 Width/depth (product) approx.  3150mm
 Height (product) approx.  2000mm
 Net weight approx.  2150kg
 Length max. (product) approx.  3050mm
 Max. width/depth (product) ca.  3050mm
 Height max. (product) approx.  2100mm
 Drive motor output  3.0kW
 Supply voltage  400V
 Mains frequency  50Hz
 Engine power hydraulic pump  0.6kW
 Engine power coolant pump  0.12kW
 Absorbed power  4.5kW
 Protection class drive motor  IP 55
 Nominal operating mode drive motor  S1
Total current consumption  12.3A
 Total connected load  8.5kW
 Saw band speed(s)  20 – 100m/min
 Speed levels  worm gear
 Saw band length  4780mm
 Saw band width  34mm
 Saw band thickness  1.1mm
 Cutting angle  4°
 Feed  ball screw
 Lifting the saw bow  350mm
 Cutting range 0° round (tube)  350mm
 Cutting range 0° round (solid material)  350mm
 Cutting range 0° rectangular lying (hollow profile)  500 x 340mm
 Cutting range 0° rectangular horizontal vertical section  500 x 340mm
 Cutting range 0° bundle (tube)  500 x 180mm
 Cutting range -45° round (tube)  350mm
 Cutting range -45° round (solid material)  350mm
 Cutting range -45° rectangular horizontal (hollow profile)  380 x 340mm
 Cutting range -60° round (tube)  230mm
 Cutting range -60° round (solid material)  130mm
 Cutting range -60° rectangular horizontal (hollow profile)  220 x 340mm
 Cutting range +45° round (tube)  350mm
 Clamping range +45° round (full material)  350mm
 Cutting range +45° rectangular horizontal (hollow profile)  350 x 340mm
 Material feed rate  3.82m/min
 Material feed max. at 1 x feed rate  1000mm
 Material feed max.  9999mm
 Material feed min.  1mm
 Table height material feed  800mm
 Cut-off length min.  1mm
 Material diameter min.  30mm
 Min. remaining workpiece length 30°  310mm
 Min. residual workpiece length 45°  750mm
 Min. residual workpiece length  100mm
 Min. remaining workpiece length automatic  310mm

Additional information

Brand

Metallkraft

Reviews

There are no reviews yet.

Be the first to review “Metallkraft HMBS 340 CNC-DG-X Fully automatic two-column horizontal metal bandsaw”

Your email address will not be published. Required fields are marked *