Description

The RM-602 is the second level up machine from the entry level RM-502. With more capacity it is a little larger, but is still economical and compact. Robustly designed, the two powered DIMAKIN rolling machine features the same manual descent top roll, and segmental standard tooling allowing thousands of applications in solid, flat bar, and square section. Additional tooling is sold separately but readily available for all other applications. This model can be operated upright, or alternatively laid on its back on the in-built supports depending on the operation being performed. This machine is operated with a fully manoeuvrable foot pedal complete with emergency stop for maximum convenience to the operator, as well as CE compliant safety.

Flat bar (hard way) * § 60×10 Ø900

Flat bar (easy way) * § 80×15 Ø700

Solid square * § 35×35 Ø1000

Solid round * § Ø35 Ø900

Tube † Ø60×2 Ø1100

Pipe † Ø48,3×2,9 Ø1000

Rectangular hollow section * ‡ 50x40x3

Square hollow section * ‡ 40x40x3

Angle (toe out) § 50x50x5 Ø800

Angle (toe in) § 50x50x5 Ø950

T-section (toe out) § * 50×5 Ø700

T-section (toe in) § * 50×5 Ø900

T-section (toe up) § * 50×5 Ø900

Channel section (toes out) § * UPN 60 Ø900

Channel section (toes in) § * UPN 60 Ø1300

Power 1,1kW-1,5hp

RPM 13,6/27,2

Tool Ø (mm) 146/98

Shaft Ø (mm) 50/50

Weight (Kg) 290

Dimensions (mm) 950x730x1420

Section mod (cm3) 16

SHIPPING DIMENSIONS 300kg 1000 x 750 x 1500mm

* Standard Rolls

† One set of rolls is required for each tube OD

‡ Special rolls for thin wall profiles

§ Special profile