PRM-35F Metallkraft (Germany) Ring Roller Manual 240v/400v

£5,250.60 inc VAT £4,375.50 ex VAT

PRM-35F 0381-2035 Ring Roller Manual 240v Convertion from 3phase

heavy welded steel construction
horizontal and vertical work possibility
lower rollers driven by a motor
Rolls are hardened
Steel shafts, hardened and ground
Delivery via upper roller
lateral straightening rollers, infinitely adjustable
powerful 400 volt engine
Left / right rotation by foot pedal

EAN: N/A Category:

Description

PRM-35F 0381-2035 Ring Roller Manual

Bending performances profile type optional
Square tube dimensions [1] 50 x 3 mm
Square tube min. bending Ø [1] 1700 mm
Square tube dimensions [2] 40 x 3 mm
Square tube min. bending Ø [2] 600 mm
Square tube heavy axis dimensions bending Ø [1] 70 x 30 x 2 mm
Square tube heavy axis min. bending Ø [1] 1200 mm
Square tube heavy axis dimensions bending Ø [2] 50 x 40 x 3 mm
Square tube heavy axis min. bending Ø [2] 1200 mm
Round tube dimensions [1] 50.8 x 2.9 mm
Round tube min. bending Ø [1] 1000 mm
Round tube dimensions [2] 25.4 x 2.3 mm
Round tube min. bending Ø [2] 350 mm
Round profile dimensions [1] 35 mm
Round profile min. bending Ø [1] 600 mm
Round profile dimensions [2] 30 mm
Round profile min. bending Ø [2] 400 mm
isosceles angle profile outside dimensions [1] 50 x 50 x 5 mm
isosceles angle profile outside leg min. bending Ø [1] 800 mm
isosceles angle profile outside dimensions [2] 40 x 40 x 5 mm
isosceles angle profile outside leg min. bending Ø [2] 600 mm
isosceles angle profile inside dimensions [1] 50 x 50 x 6 mm
isosceles angle profile inside leg min. bending Ø [1] 1000 mm
isosceles angle profile inside dimensions [2] 30 x 30 x 3 mm
Explanations for bending performance, profile type optional The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7
Bending performances profile type standard
Square material dimensions [1] 35 mm
Square material min. bending Ø [1] 900 mm
Square material dimensions [2] 20 mm
Square material min. bending Ø [2] 300 mm
Flat material light axis dimensions bending Ø [1] 100 x 15 mm
Flat material light axis min. bending Ø [1] 450 mm

Flat material light axis dimensions bending Ø [2] 60 x 10 mm
Flat material light axis min. bending Ø [2] 350 mm
Flat material heavy axis dimensions bending Ø [1] 60 x 10 mm
Flat material heavy axis min. bending Ø [1] 500 mm
Flat material heavy axis dimensions bending Ø [2] 40 x 10 mm
Flat material heavy axis min. bending Ø [2] 400 mm
UPN profile top rib dimensions [1] 60 x 7 mm
T profile top rib min. bending Ø [1] 700 mm
UPN profile top rib dimensions [2] 50 x 6 mm
T profile top rib min. bending Ø [2] 500 mm
Explanation for T profile rib above Additional spacers may be required
UPN profile outside rib dimensions [1] 60 x 7 mm
T profile outside rib min. bending Ø [1] 700 mm
UPN profile outside rib dimensions [2] 50 x 6 mm
T profile outside rib min. bending Ø [2] 500 mm
UPN profile inside rib dimensions [1] 60 x 7 mm
T profile inside rib min. bending Ø [1] 700 mm
UPN profile inside rib dimensions [2] 50 x 6 mm
T profile inside rib min. bending Ø [2] 500 mm
UPN profile outside leg dimensions [1] UPN 80 mm
UPN profile outside leg min. bending Ø [1] 1000 mm
UPN profile outside leg dimensions [2] UPN 30 mm
UPN profile outside leg min. bending Ø [2] 700 mm
UPN profile inside leg dimensions [1] UPN 80 mm
UPN profile inside leg min. bending Ø [1] 1200 mm
UPN profile inside leg dimensions [2] UPN 30 mm
Inside leg min. bending Ø [2] 800 mm
Explanations for bending performance, profile type standard The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7
Dimensions and weights
Length 750 mm
Width/depth 1000 mm
Height 1400 mm
Weight approx. 400 kg
Drive output
Main motor 1.5 kW
Electric Data
Supply voltage 240v Inverter runs 400 V
Mains frequency 50 Hz
Machine data
Shaft diameter top 50 mm
Shaft diameter bottom 50 mm
Roller diameter top 155 mm
Roller diameter bottom 155 mm
Speed 4.5 m/min