Optimum OPTIturn TX 5216 Manual Lathe

£41,392.26 inc VAT £34,493.55 ex VAT

DESCRIPTION
    • Machine bed made of heavily ribbed cast iron
    • One-piece machine base made of steel
    • High stiffness of the headstock housing due to heavily ribbed 25GG casting
    • All gears of the feed gear made of steel, hardened and ground
    • Waves on needle bearings, all components are lubricated in an oil bath
    • Hardened and ground spindle ensures tremendous accuracy and durability
    • Due to the high cutting performance, a high chip removal during roughing is no problem
    • Service-friendly removable rear panel
    • Energy chain for gentle line and hose routing
    • Lockable chip protection moves with the bed slide with integrated position indicator and coolant hose, manually displaceable
    • Decoupled handwheels tested to EN 23125
    • Two-channel right-left switch tested to EN 23125
    • No change wheels needed
    • Switch with life cycle calculation tested according to EN ISO 13849
    • With safety device against simultaneous operation of threading and feed mechanism
    • Bed guides hardened and precision ground
    • Electronically braked engine
    • Electronic feed shutdown of the Z axis
    • All electronic controls to reach centrally
    • Complete illumination of the workspace
    • External coolant tank with level indicator and oil separator
    • Complete guide and tension spindle cover
    • Electrical position switch off with quadruple position stop
    • 3-jaw lathe chuck in the standard scope of delivery
    • Quick change steel holder SWH 7-C
    • 1 steel holder 32 x 130 type D for square chisel 25 mm

 

  • Digital Position Display DP700 (For more information see “NEWALL-DP700”)

TX 5216

  • Large spindle bore Ø 80 mm
DELIVERY CONTENTS
  •  Three jaw chucks
  •  Reduction sleeve MK 7 / MK 5
  •  Fixed center point MK 5 long
  •  Fixed centering point MK 5 short
  •  Quick change steel holder SWH 7-C (TX 5216)
  •  Quick change steel holder SWH 7-C (TX 6222)
  •  Steel holder 25 x 120 type D for square chisels
  •  operating tool

        1 year warranty logo

EAN: N/A SKU: 0343-2440 Category: Tags: ,

Description

Precision guide and drawbar turning machine

Precision master and spindle lathes meet the highest requirements in terms of technical equipment and precision. With digital position indicator NEWALL DP 700

 

TECHNICAL DATA
Dimensions and weights
Length (product) approx. 3000mm Height (product) approx. 1860mm
Width/depth (product) approx. 1195mm Net weight approx. 2470kg
Work areas
Max. height 260mm Swing diameter above longitudinal slide 520mm
Max. width 1600mm Swing diameter above planing slide 324mm
Swing diameter above machine bed 520mm Turning length in bed bridge 780mm
Swing diameter in bed bridge 780mm Bed width 280mm
Speed range
Number of gears 12 Speed range
30 – 1500min¯¹
Electric Data
Drive motor output 5.5kW Mains frequency 50Hz
Supply voltage 400V
Cooling lubricant system
Cooling lubricant system coolant pump output 60W
Spindle
Spindle chuck Camlock DIN ISO 702-2 No. 8 Spindle cone MT 7
Spindle bore/rod passage diameter 80mm
Tailstock
Tailstock chuck MT5 Tailstock quill diameter 72mm
Tailstock quill stroke 180mm
Pitches
Metric pitch 0.5 – 15mm/rev Diametrical pitch 4 – 120D.P.
Imperial pitch 60 2Threads/1″ Modular thread pitch
0.5 – 15mm/rev
Travel
Travel X axis 170mm Travel Z axis 350mm
Feed
Longitudinal feed range 0.1 – 3mm/rev Flat feed range
0.05 1.5mm/rev
Electrical connections
Total rated value 6.1kW

Additional information

Weight

2470 kg

Brand

OPTIturn

Reviews

There are no reviews yet.

Be the first to review “Optimum OPTIturn TX 5216 Manual Lathe”

Your email address will not be published. Required fields are marked *