Baileigh Rotary Draw Bender Hydraulic Dual Cylinder RDB-500
£25,482.00 inc VAT £19,811.50 ex VAT
Rotary Draw Bender Hydraulic Dual Cylinder
If you need to bend big pipe, really big pipe, then the RDB-500 is the perfect rotary draw bender for you. The RDB-500 has a maximum capacity of 76.2mm square (3″) and 88.9mm OD tube (3.5″) schedule 40 pipe (89mm x 5.5mm), 76.2mm (3″) square & 76 mm (4″) tube. (185 wall mild steel). The maximum center line radius is 514mm (20.25″) (depending on wall thickness and material). The RDB-500 tube and pipe bender has one shot bending up to 206° without stopping or ratcheting, and is variable speed as controlled by the operator via a foot pedal. The RDB-500 also has a digital auto-stop that will accurately stop the bending process when the bend gets to the desired degree.
Powered by 400 volt, 50hz, three phase power, the RDB-500 uses an industrial grade low pressure hydraulic system to handle all the bending. Like all Baileigh Industrial benders, the RDB-500 has a fast cycle time which makes any job more efficient.
The RDB-500 pipe bender uses Baileigh Industrials quick drop-on tooling which will allow you to chose from over 5,000 different configurations of outside diameters and centerline radii. If we don’t stock it, we can also make custom die sets. Consistent with all Baileigh tube and pipe benders, this rotary draw bender is made of solid steel construction.
400V, 3Ph, 50Hz
Dimensions: 70″ x 56″ x 41″ / 1778mm x 1422mm x 1041mm
Weight: 1800lbs / 820Kg
Capacity Round Pipe M.S: 88.9mmx5.5mmRound Tube M.S: 3″/76mmx6.5mmSquare Tube M.S: 3″/76mmx6.5mmRound Tube S.S: 3.5″/89mmx5mm Steel Rod: 2″/51mmSpeed to 180: 36 sec Minimum O.D: 0.25″/6.3mm Maximum CLR: 20″/508mm Minimum CLR: 0.50″/13mm Programmer Capacity: N/A