Description

The DP-1850G drill press harnesses a lot of power for its price. This variable-speed drill press can handle those bigger, tougher jobs at your fabrication or machine shop.

2 hp motor runs on 400 volt 3-phase power.

26-3/4” swing to tackle large pieces of material.

Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”.

Gear head turns at speeds between 90 and 2425 rpm, so you can select the right speed for almost any application.

#4 Morse spindle taper feed is electric and completely adjustable.

Massive column and cast steel base reduce flexing even when youÂ’re drilling at full capacity.

21-1/4” x 17-1/4” work table with X-pattern T-Slots.

.7” table-slots allow for a vise or fixture to get a firm hold on the material.

Includes an electronic power-down feed

Specification

DP-1850G

Spindle Speeds 12

Max. Drill Capacity 1.57″

Max. Tapping Capacity 7/8″

Swing 26-3/4″

Distance from Spindle to Table 4″ to 24-3/8″

Distance from Spindle to Base 47″

Spindle Taper MT-4

Spindle Travel 7-3/4″

Spindle Speed Range 90-2,425 RPM

Power Feed .0047″, .0094″, .0157″

Table Size 17-1/4″x 21-1/4″

Base Size 33″ x 25″

T-Slot Width .7″

Motor 2 hp

Power 400V 3-phase

Shipping Weight 1200 lbs

Shipping Dimensions (Inches) 89″ x 23″ x 43″

* specifications subject to change without notice.