Aircraft M PLUS 20-48A Membrane dryer 2048301
£1,748.68 inc VAT £1,457.23 ex VAT
with integrated filter
Description
Aircraft M PLUS 20-48A
- The ultimate membrane dryer technology with integrated nanofilter
- Filtration and drying in one housing (simple filter element change)
- Low purge air requirement (Twist 60 technology)
- Availability of dried compressed air immediately without running-in phase
- Safe drying due to the high partial vapor pressure gradient
- No change in the compressed air temperature and composition
- Proven 100,000 times
- Maintenance-free (except filter element change)
- For diverse applications, including for breathing air treatment
- Also ideal for use directly behind the compressor / aftercooler
- Optionally also for higher loads (assembly potting, 16 bar, 70°C)
- For a reliable function of the DRYPOINT M membrane dryer must meet the following requirements:
- The incoming compressed air must not contain any liquid condensate
- Particles larger than 1 μm must be separated before the membrane dryer
- The oil content of the compressed air must not exceed 0.01 mg/m³.
- DRYPOINT M membrane dryers have been an alternative to existing ones for years Compressed air drying process proven.
Advantages DRYPOINT M PLUS
- Proven process of highest reliability and functional safety
- Immediate availability of dry compressed air, even when working discontinuously
- Low purge air requirement, compressed air drying can be adjusted to the application
- Compact and robust, small space requirement due to low overall height
- Compressed air inlet and outlet on one level (filter version), easy to combine with CLEARPOINT filters
- Maintenance and wear-free as there are no moving parts
- No reduction in the oxygen content, therefore also suitable for breathing air treatment
- No electrical connection, also suitable for Ex areas
- Long service life in case of use of CLEARPOINT filters
- Environmentally friendly, does not require CFCs / CFC-containing refrigerants or adsorbents
- Complete solution: filtration and dryer in a compact form, integration of drain pipe
- Filtration at the point in the treatment chain where the highest efficiency is achieved
- Easy maintenance / replacement of filter element as with a regular filter
Filter element: N (nanofilter)
- The CLEARPOINT filter element type N is used to separate solid particles down to 0.01 micron, water and oil aerosols . The element has a multi-stage structure for efficient and long-lasting filtering. In the first stage, coarse particles are retained by a pre-filter layer. In the second stage, finer particles are absorbed by a depth filter bed made of high-performance borosilicate fiber fabric. Due to the very large cavity volume of the filter medium (96%), a very high dirt holding capacity is achieved. The filter medium is specially impregnated in order to avoid cross-sectional swelling of the individual fibers.
Trap: Float trap
- The basic version includes a float drain.
Size 10 – 40
- This size is for the demand-oriented compressed air drying of medium volume flows configured. Different levels of drying of the compressed air are achieved through different purge air settings.
Key Features:
Special
- Drying by partial vapor pressure compensation of water vapor by diffusion in combination with a highly selective membrane
- No change in the compressed air composition – can be used for breathing air treatment
Efficient
- Reaches the required pressure dew point with low energy consumption
- Very fast availability of dried compressed air
- Filtration and drying compact in one device
Robust
- Housing made of seawater-resistant aluminum
- Low-maintenance, currentless technology
System-compatible
- Modularly combinable with CLEARPOINT Filter program
- Can be used anywhere along the compressed air treatment chain – can also be integrated into system technology
Delivery Content:
- 2 wall brackets
- Connection fitting for filters (1/2″ to 3/4″)
Dimensions(mm):
L: 1000 H: 220 W: 150
Weight: 4.08kg