Description

Aircraft 703/13/15

• The two-stage, high performance, 2-cylinder unit provides very low RPM for smooth, low-vibration operation
• Large fan for optimal cooling
• Between- and aftercooler for a low tank inlet temperature and reduction of condensation
• High quality electric motors equipped with motor protection switch
• Ready for connection with all fittings such as safety valve and check valve, condensate and air release valve for autonomous operation
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
• High quality CONDOR pressure switch for fully automatic on-off operation
• Flexible armored hose line with heat protection prevents vibration break

Compressor compressors are used when:

• the available air volume is too small
• Peak performance needs to be met
• 10 0% safety must be guaranteed
• Old equipment would require expensive repairs

We save for you – 13 bar instead of 15 bar!

• Our 15 bar compressors are factory set to 13 bar shutdown pressure. The reason for this is that, according to experience, 90% of all users have an operating pressure of max. 13 bar
• Any additional pressure generated means an energy consumption of about 8% per bar.
• If you still need the maximum pressure of 15 bar, you can easily do it yourself at any time at the pressure switch.

TÜV free

• AIRPROFI compressors are ZÜS type tested. This eliminates the TÜV approval.
• Setup and periodic inspections can thus also be carried out by a qualified person (only valid in Germany)

Delivery Content:

• Two-stage compression two-cylinder high-performance unit
• Automatic CONDOR pressure switch
• Internally and externally hot-dip galvanized compressed air tank
• 1 pressure gauge for tank pressure
• 1x 3/4 inch ball valve for compressed air extraction
• 1x 3/8 inch ball valve at the lower tank outlet for drainage
• Power cable with 400 V plug
• Power plug with phase inverter for manual reversal of the direction of rotation
• Flexible armored hose line with heat protection
• safety valve
• Shock mounts
• Ready for connection with all fittings

Dimensions(mm):

L: 730 H: 700 W: 690

Weight: 55kg