Metallkraft GS 18 Electric Thread Tapper (1 Ph 230v)

£700.40 inc VAT £583.67 ex VAT

Features

Reversing gear allows a very short processing time: pressure on the spindle starts the slow clockwise rotation of the tool, when retracting the fast rewind is automatically activated at 680 rpm
Easy tapping in just one operation due to high torque, low speed and high concentricity
Additional handle allows optimal and comfortable tool guidance
Compensation of angular misalignment of the cutting tool in the bore by a joint between food intake and threaded chuck
Standard depth stop for blind hole drilled holes
Image shows two pin European connection, for sale inside the UK the plug will be converted by us to a three pin standard UK mains plug.

Delivery Contents

Description

0386-0018

Metallkraft Electric tap GS 18

With reverse gear for time-saving, precise cutting of threads in boreholes

Dimensions and weights
Length (product) approx.	400mm	Net weight approx.	3.15kg
Width/depth (product) approx.	325mm	Explanation about Dimensions	Additional handle at 90° position to the handle
Height (product) approx.	240mm
Drive output
Absorbed power drive motor	0.45kW
Speed range
Idling speed(s) (CW run)	280min¯¹	Speed(s) under load	170min¯¹
Idling speed(s) (CCW run)	680min¯¹	Speed(s) under load (CCW run)	410min¯¹
Electric Data
Supply voltage	220 – 240V	Mains frequency	50/60Hz
Thread tapping
Thread tapping steel (S235JR) short-term operation	M18	Thread tapping aluminium short-term operation	M18
Thread tapping steel (S235JR) continuous operation	M14	Thread tapping aluminium continuous operation	M16
Electrical connections
Connection cable length	3m
Expert infos
Trigger standstill torque slip clutch	31.4 – 34.3nm	Explanation triggering standstill torque slip clutch	Information for thread diameter M16

Brand	Metallkraft

There are no reviews yet.

Be the first to review “Metallkraft GS 18 Electric Thread Tapper (1 Ph 230v)”