Optimum OPTIturn TZ 4V Manual Metalworking Lathe (3 Phase 400v)
£22,632.90 inc VAT £18,860.75 ex VAT
- Hardened and ground Z-axis guideway
- Partial covering with entrained, large-dimensioned chip protection
- Chip protection with integrated position indicator, coolant hose and additional control panel
- Plan and upper slide spindle is hardened and ground and adjustable via split spindle nut
- Guide and feed shaft cover
- Fine graded feed and thread cutting area
- LED machine lamp for complete illumination of the working area
- Energy chain for gentle line and hose routing
- Change wheels optionally also available for inch and module threads
- Control cabinet with 24 V DV power supply
- Switch with life cycle calculation tested according to EN ISO 13849
- Decoupled handwheels tested to EN 23125
- Two-channel right-left switch tested to EN 23125
- All contactors and relays from Siemens or Schneider
- Safety handwheels with release function in the X and Z axis
- Forward removable chip tray
- Quick change steel holder SWH 5-B
- Steel holder 25 x 120 type D for square chisel 20 mm
- Digital position indicator NEWALL DP 700
TZ 4V:
- Reduction of the deceleration time of the main spindle through energy recovery
- All contactors and relays from Siemens or Eaton
Included as Standard: Fixed steady Ø10 – 130 mm. Travelling steady Ø10 – 100mm. Reduction sleeve MT 3 and MT 6. Fixed centre MT 3. Quick change tool holder SWH 5 – B. Square Tool holder 25 x 120 type D. Interchangeable gear set for metric thread.
Remember to order Lathe Chucks!
Description
0343-2245
Precision Center and Turning Center Lathe
OPTIturn TZ 4V
Precision head and spindle lathes with digital position indicator NEWALL DP 700 and quick-change steel holder. TZ 4V with electronically controllable drive
Technical Data
|
Dimensions and weights
|
|||
| Length (product) approx. | 1960mm | Height (product) approx. | 1690mm |
| Width/depth (product) approx. | 1060mm | Net weight approx. | 1250kg |
| Work areas | |||
| Max. height | 200mm | Swing diameter above planing slide | 245mm |
| Max. width | 800mm | Bed width | 260mm |
| Swing diameter above machine bed | 400mm | ||
| Speed range | |||
| Number of gears | 2 | Speed range |
30 – 3000min¯¹
|
| Electric Data | |||
| Drive motor output | 5.5kW | Mains frequency | 50Hz |
| Supply voltage | 400V | ||
|
Cooling lubricant system
|
|||
| Cooling lubricant system coolant pump output | 125W | ||
|
Standards and certifications
|
|||
| Standard | DIN EN 55011 | EMC level | C3 |
| Spindle | |||
| Spindle chuck | DIN ISO 702-1 No. 5 | Spindle cone | MT 6 |
| Spindle bore/rod passage diameter | 52mm | ||
| Tailstock | |||
| Tailstock chuck | MT 3 | Tailstock quill diameter | 50mm |
| Tailstock quill stroke | 110mm | ||
| Pitches | |||
| Metric pitch | 0.2 – 14mm/rev | Number of imperial pitches | 42 |
| Number of metric pitches | 22 | Modular thread pitch | 0.1 – 7mm/rev |
| Imperial pitch | 80 1Threads/1″ | Number of modular thread pitches | 44 |
| Travel | |||
| Travel X axis | 112mm | Travel Z axis | 212mm |
| Feed | |||
| Longitudinal feed range | 0.0263 – 1.8416mm/rev | Flat feed range |
0.0133 – 0.9321mm/rev
|
| Number of longitudinal feeds | 48 | Number of flat feeds | 48 |
|
Electrical connections
|
|||
| Total rated value | 5kW | ||
| Motor(s) | |||
| Drive motor gears | 2 |
Additional information
| Weight | 1250 kg |
|---|---|
| Brand | OPTIturn |
Related products
-
Optimum HSP 52 Spindle-Ø 48 – 56 mm Hollow spindle stop
£138.74 inc VAT £115.62 ex VAT Add to cart -
Optimum BT 30/ISO 30, R8 Taper Cleaning Tool
£14.44 inc VAT £12.03 ex VAT Add to cart -
Excel Machine Tools – Inserts VBMT 1102
£127.66 inc VAT £106.38 ex VAT Add to cart -
OPTIMUM Four-jaw lathe chuck, independent clamping Ø 100 mm
£138.74 inc VAT £115.62 ex VAT Add to cart
Reviews
There are no reviews yet.